Replacement Teeth DR Stump Grinder
Stump Grinder Accessories
8 Teeth Set with Hardware
Customer Photos
Review
Haven't had to replace the original one yet. But they look like the others.
Stump grinder teeth
Haven’t had to replace yet. The original great so far. Have done 15 trees of all sizes
Replacement cutters
Co. provides new set of cutter complete with al required hardware. Good quality
Teeth
These are very tough. Always good to have
Replacement Teeth
The replacement teeth look OK.
Q.can the teeth be sharpened
A.Thank you for contacting us. The cutting teeth cannot be sharpened. The tungsten carbide on the teeth tip is the same material used for drilling through bedrock. The 8 teeth can be rotated 3 times to create a new chipping surface. Each surface or side will last between 10-20 hours, a total of 30-60 hours per set. Teeth can be easily replaced in about 15 mins. Please feel free to contact us if you have any other questions.
Posted by:ROGER C from louisville, OH on 10/15/2020
Q.can the teeth be sharpened
A.Thank you for contacting us. The cutting teeth cannot be sharpened. The tungsten carbide on the teeth tip is the same material used for drilling through bedrock. The 8 teeth can be rotated 3 times to create a new chipping surface. Each surface or side will last between 10-20 hours, a total of 30-60 hours per set. Teeth can be easily replaced in about 15 mins. Please feel free to contact us if you have any other questions.
Posted by:ROGER C from louisville, OH on 10/15/2020
Q.Can you sharpen these teeth with a green carbide sharpening stone?
A.The cutting teeth on the Stump Grinder should not be re-sharpened. Each tooth has three different cutting sides. When one becomes dull, you can rotate it for a new cutting side. You will get 10-20 hours of cutting from each side, giving you 30-60 hours per a set of teeth. They are easy to replace.
Posted by:SAMUEL M from Jasper, IN on 10/15/2020
Q.Can you sharpen these teeth with a green carbide sharpening stone?
A.The cutting teeth on the Stump Grinder should not be re-sharpened. Each tooth has three different cutting sides. When one becomes dull, you can rotate it for a new cutting side. You will get 10-20 hours of cutting from each side, giving you 30-60 hours per a set of teeth. They are easy to replace.
Posted by:SAMUEL M from Jasper, IN on 10/15/2020
Q.Do these teeth fit all your stump grinders?
any special tools needed to replace teeth?
A.Part # 30505 is for the current 8 tooth Head on the Stump Grinder. They are not compatible with any previous Head or Model we have sold. The current Head can be installed on the same current model that came with the 9 tooth Head.
Posted by:Anonymous from Texas, TX on 10/15/2020
SHIPPING
Standard Shipping
Most standard-sized items ship by UPS or USPS and take 3-12 business days to arrive. Total the cost of ALL items in your order subject to Standard Shipping (exclude items over 150 lbs which ship by Motor Freight), then use the chart below to figure shipping. The charges will be automatically calculated when you place your order online.